SKP1000 says should update it with usb cable (Solved)

Problem:

Please i bought SKP1000 one week ago

When i power on it say i should update it with usb cable

 

Solution supplied by www.obd2eshop.com engineer:

The sd card file is damaged, please do:

1.format sd card;

2. Download the attached file, decompressed it and paste it into the sd card.
3. Turn on SKP1000 machine and enter Update menu to update the System.

 

Download the attached file:

https://mega.nz/#!hcgGnK4S!MCxTV2Qkn04dFddSGf3ZuFQP4GTkoXLqD-EnWdGUdzY

 

SKP1000 system update procedure:

Before update firmware, please take out the TF card and insert it into the card reader, then plug into the computer USB port. Double click “My Computer”, find out ” local Disk (H:), right click to choose “Format”.

 

Tip: Tick on the “Quick format” and click “Start.

After complete format, go to the official site to download the update file, then copy and paste the file into the TF card, after finish, plug the TF card into the machine, power on the machine to the main interface.

Click on “Firmware update” to update the system or the Adaptor.

Firstly choose “System firmware”, press [Yes], the procedure shown as below:

Update Firmware succeed shown as below, Press [NO] to back.