April, 2018 | OBD2eShop official blog

How to install GM Tech2 clone TIS2000 for SPS Service Program System?

April 27, 2018 sales 0

What’s SPS? The GM Service Programming System (SPS) is a personal computer (PC) application used to reprogram vehicle electronic control modules (ECMs). The SPS […]

CGDI BMW F series enable disable key guide

April 26, 2018 sales 0

This post includes CGDI BMW F series enable & disable the key guide. That is CGDI BMW pro update F series enable /disable the key […]

launch-creader-9081-diagnose-reset-vw-01(1)

Launch Creader 9081 diagnose & reset VW with no problem

April 24, 2018 sales 0

Use Launch Creader 9081 to easily diagnose & reset VW with no problem, it’s perfectly even I am a new user. I use it to […]

Free update Lonsdor K518ISE for chip & remote, Kernel, Hex editor, sleep

April 13, 2018 sales 0

Free update Lonsdor K518ISE key programmer [April 12, 2018]: Chip generation + Chip Recognition + Frequency detection Hex editor Tablet sleep to save power […]

Autel MaxiTPMS TS601 is the best for Hot summer

April 12, 2018 sales 0

Autel MaxiTPMS TS601 should be the best for hot summer to perform activating the TPM sensor, cloning a set of TPM sensors and creating a […]

How to check BMW ICOM firmware need update + how update it?

April 11, 2018 sales 0

BMW ICOM A2 diagnostic interface failed to be connected, because the firmware is too old and need to upgrade it. Firstly, you need to […]

JMD handy baby 9.0.0 version update and 8C copy procedure

April 9, 2018 sales 0

JMD handy baby official and 9.0.0 (client 4.1.8) software download: http://www.handy-baby.net/download.html?lang=en_US Handy Baby v9.0.0 update: 1.Show Epica(4D60) master key match code after identification. 2.Increase unlock […]