JLR SDD V125,V130,V138, V156 free download and installation

Offer older but stable version JLR SDD V125,V130,V138 as well as newest SDD V156 version, and installation videos.


JLR SDD V125 V130 V138:





Need patch


also Need driver



PS: The software is clean and only misuse or inexperience will cause any issues. ECM/Module flashing be sure you know what your doing

I take no responsibility for any damage done to your car or equipment with use of this software.


SDD V130

Just be aware that you will be running 2 operating systems at the same time. So if your using old hardware that is slow running one version of Windows, its going to be a lot slower running two. I created these images on my i7 overclocked Gaming rig, and use it on a 4 year old 2 core netbook. The newer and more powerful the hardware. The better it will run.

If you’re using an older PC/Laptop, remember it is now running two versions of windows at the same time. So on start-up of the VM, it can take a number of minutes for the VM to recognize and start the USB’s to recognize your mongoose. Have patience and it will find it. I have had a number of people say that the VM is not finding the Mongoose. This has all been on older machines with mechanical hard drives. If you wish to speed this up, get newer hardware or replace the drive with a SDD. But remember the software itself is not quick as it is browser based.

Another tip is make sure your plugged into the mains (and god created the extension cord) with older laptops (dodgy batteries). I had a laptop die on me part way flashing a module. Got an extension cord, turned it back on and it picked up where it left off. So don’t panic if something goes wrong. Sit back and think before you do something really stupid!!!!

I run this quite comfortably on a 4 year old Netbook. Its a duel core Celeron with 4gb, 64gb SSD and the image is on a 64gb SDCard. I suppose you could install the image natively to a hard drive, but that would have to be something you will have to research yourself.

You can also consider if using an older laptop. Running a Disto of Linux with VirtualBox installed. Some disto’s of Linux have very small footprints and will help you with running two OS’s at the same time.

I will request if you download or use anything i supply! You give a few pennies in an animal charity box next time your able.

You should not have to pay anything for this VM image.
(or burnt copies of the original SDD disks)
I provide it free of charge, except for the condition above!


How to install Jaguar SSD Versions 130?

Version 130 already has Mongoose toolkit installed to flash your cable with the right firmware and also a script to auto set the date to the correct one. Has both Jaguar and Land rover files included. Will need ID and password to be entered on first use (Included)

1. How to install
Install your version of Virtual-box. Virtual-box is available for Windows PC, OSX for Apple Mac’s and Linux at https://www.virtualbox.org/wiki/Downloads


Go to file and Import Appliance and select the image you downloaded. SDD130.ova


  1. Sit back. Maybe put the kettle on as it can take quite a while depending on your hardware.


You can now (if you want and I do advice it), right click on the SDDimage, and create a clone. So you have a backup just in case you mess up, and instead of having to copy the image over again to your laptop


(TIP) You can make as many clones as you like (depending on your hard drive space) and if you’re working with multiple cars, then you can rename each clone for an individual cars!


  1. Double click the file that now appears called SDD130. It should now load up windows XP in a window
  2. How to use Jaguar SDD in a VMDo not activate the wifi or any kind of online connection IN THE VM. Leave it offline. You can keep your laptop connected to google things out of the VM. Just don’t connect the VM online!!

You should now have a window running XP. If you are using Version 130. A black window will appear. That is the auto script to set the date and time to 01/08/2012. Each time you start it, it will change the date to the correct one for it to work. Just click in the black box and press a key.


Any windows boxes that pop up to search for hardware. Just cancel them as it’s looking for drivers of hardware you don’t have. Ignore and cancel.


Plug your mongoose into the car and the other end into the laptop. Turn the ignition of your car to position 2.


Go to devices on the top of the Virtual box window, choose USB and select the mongoose. It should say Drews. Don’t select any option that will bring you online in the image!


Now one of two things will happen. It will automatically detect the mongoose and update the firmware on the device or not. If not then you could already be compatible. You can double click on the windows icon for Mongoose JLR Configuration. You should see your mongoose in the white panel in the configuration menu. Select it and flash firmware. (It will send the right firmware to be compatible with the version of SDD you are using. If your using a different version of SDD. It will flash whatever one you need) to your mongoose


Now if you want to you can change the resolution of the virtual XP just like normal windows. I have set it at a low 800×600 so it is compatible on everyone’s screen resolution. So right click on the window and adjust to your own laptops specifications. If you press RIGHT CONTROL BUTTON and C for scaled mode or RIGHT CONTROL BUTTON and F for full screen mode.


Now double click on JLR SDD. It should now load up Internet explorer (yes it is browser based and the worst browser ever created). If it fails to load. Close the browser and the little window with stop application Click stop application. Just double click again Jaguar SDD, and it will load. If you are confronted with a password screen (only with Version 130), which sometimes happens? There is a password.txt on the VM images desktop for v130. USER ID – JLR9A8172 and Password – L538X760, then press identify


You should be now confronted with the vehicle identification number (VIN) screen. If not then your mongoose is not communicating to the car. Check Below!

Is it plugged into the car and laptop?
Is the car ignition in position 2?
Did the mongoose configuration tool flash the firmware?
Did you activate USB in the Virtual box?

Jaguar IDS 125 TEST RUN


Jaguar SDD Version 130 VM image


Jaguar SDD Version 138 VM image



JLR SDD V156 install on win7:

The video is SDD V154, it is as the same as V156.

uploaded by www.obd2eshop.com engineer.


Thanks to @TheMindBuddah for his contribution (url:

https://www.jaguarforum.com/showthread.php?t=108460 )

JLR DoIP VCI  Tool for best price: