How to fix BMW INPA Ediabas K+CAN INITIALIZATION ERROR

Yesterday a customer sent me a message about his BMW INPA/Ediabas K+CAN showed error: INITIALIZATION ERROR. killed several hours with this knock-off. The car he connected to is BMW 2011 – e92 – LCI.

He set the COM to 1, obd.ini is also COM1.
bmw-inpa-k-can-usb-interface

Here obd2eshop technicians have provided a solution to the problem:
(solution offered by an experienced user with K+Dcan cable)

Modify the EDIBAS.INI as follows

RemoteHost
; Description : server address/name
; Default = –
; RemoteHost = Desmo16

Desmo16 being my computer’s name (note that this must be maximum 8 chars)

and

Port
; Description : IP communication port
; Value : 1000 < port < 30000
;
; Spezialfall OP(P)S /ICOM:
; Value : 6801 ;OBD-Treiber (CAN)
; Value : 6802 ;Most-Treiber
;
; Default = –
; Port = 6801

OBD2 notice that you should be sure port is 6801 as mine was 3000. It worked like a charm after i made these mods.

Learn more: http://www.obd2eshop.com/producttags/bmw-diagnostic-tool.html