R280 Plus Function introduction:
R280 Plus supports the latest BMW Motorola MC9S12XEP100 chip (5M48H/1N35H), this product is a powerful Motorola microcontroller dedicated programmer. Automatic search mileage address and display the mileage, the demolition of the chip, the number of kilometers of direct input, the data can be directly visible, can be arbitrarily edited. Arbitrary read and write /P-FLASH D-FLASH data, this product features a powerful, decryption security, becoming the automotive computer repair, data recovery, data transfer and other professional electronic maintenance engineer.
The latest generation of processor programmer.
Using the latest software and hardware, hardware security level is high.
Support for the upgrading of programming tools, to provide 24 hours of technical support, product 1 years warranty free upgrade.
R280 Plus Support models:
R280 Plus is a powerful microcontroller dedicated BMW Motorola programmer support models are as follows:
BMW 1 series – F20, F21 chassis – 2016 years ago
BMW X1 series – E84 chassis – 2016 years ago
BMW 3 series – F30, F31 and F35 chassis – 2016 years ago
BMW X3 series – F25 chassis – 2016 years ago
BMW 5 series – F10, F11 and F18 chassis – 2016 years ago
BMW X5 series – F15 chassis – 2016 years ago
BMW 6 series – DMEM/F12 F13 chassis – 2016 years ago
BMW X6 series – F16 chassis – 2016 years ago
BMW 7 series – F01, F02, F03, F04 chassis – 2016 years ago
BMW GT series – F07 chassis – 2016 years ago
Support for BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.).
Support for BMW EWS4 (2L86D).
Support EZS (1J35D/2J74Y/4J74Y/0L02M/1L02M/3K85K/3K91D/1L85D/1L59W/3L40K/4L40K, etc.).
Support for a variety of SRS computers (9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K79X/5H55W, etc.).
Support M35080 series quick wipe, read and write (35080/35080-V6/35080-VP/080D0WQ/160D0WQ/35160, etc.).
Support FLASH 0K50E online write.
Please turn off the anti-virus software before R280 installation,or use anti-virus software is set to be trusted software, so that the installation and use of R280 software.
Both Windows xp and Win 7 are ok
Here are all steps of R280 installation…
Insert R208 disk and open it
Copy R280 Plus-3.rar to Desktop and then extract it
Open R280 Plus-3 folder and run R280 Plus.exe
Plug in the R280 programmer power supply and USB line
Open R280 Plus properties and find targets in local disk c:/program file/r280 plus/r280 cas4 driver
- Run CP210xVCPInstaller.exe to Install the device driver
- Click on Cancel in R280 Plus properties
- Install software for R280 plus automatically
- Install software for Silicon Labs CP210x USB to UART bridge (automatically)
- Run “register controls.Bat”MS-DOS Batch Filein disk c:/program file/r280 plus
- Run R280 Plus software:
- First, read M5080 in R270 in circuit programmer
- Select MCU M5080
- Read M5080
- Save the bin file after reading m5080
- Second, read 5M48H in R280 cas4+ programmer
- Select MCU 5M48H to read