OBDSTAR X300 DP PAD key programmer can be able to do all keys lost for Toyota Corolla 2012 G chip key via OBD. Here let’s check the operation steps & pictures as below,
Connect OBDSTAR X300 DP via OBD diagnostic socket
Select IMMOBILIZER
Select Toyota
Select Toyota/Scion/Lexus V31.11
Select from vehicle, press OK
Select vehicle make: Toyota
Select Toyota Region, for example Asia
Select Toyota model: Corolla
Select model year:2010-
Select Immobiliser
Select key chip type: Type 1(With G 72)
Select function: Reset immobiliser (All keys lost)
Switch ignition off
Switch ignition on
Switch ignition off and remove the key
Switch ignition on
Switch ignition off and remove the key
The system pops up the tutorial of key programming throughObdstar X300 DP PAD:
“program keys as the following steps within 120 seconds:
A: program 2 master keys and 1 sub key
1- program the first master key, turn on the ignition and wait for 5 seconds
2- insert the second master key, turn on the ignition switch and wait for 5 seconds
3- insert the third sub key, turn on the ignition switch and wait for 5 seconds.
The security light turns off and programming is finished.
B: program 1 master key (here, we should follow this guide)
1- insert the first master key, turn ignition on and wait for 5 seconds”
2- insert the second sub key, turn on the ignition switch and wait for 5 seconds
3- turn on the ignition switch quickly for 5 times. The security light turns off and programming is finished.
C: program 1 master key:
1- insert the master key, turn on the ignition switch and wait for 5 seconds
2- turn on the ignition switch quickly for 5 times. The security light turns off and programming is finished.”
Finally, Obdstar x300 dp key programmer succeed does all key lost with G chip through OBDII!