Step of R280 CAS4 Programmer Software Installation

Here is the software installation guide of R280 Plus CAS4 BDM Programmer for BMW Motorola MC9S12XEP100 chip (5M48H/1N35H).

NOTE:

Please turn off the anti-virus software before R280 installation, or use anti-virus software is set to be trusted software, so that the installation and use of R280 software.

Operating system:

Both Windows xp and Windows 7 worked

How to install R280 CAS4 Programmer software

Insert R208 disk and open it

Copy R280 Plus-3.rar to Desktop and then extract it

Open R280 Plus-3 folder and run R280 Plus.exe

Plug in the R280 programmer power supply and USB line

Open R280 Plus properties and find targets in local disk c:/prog

ram file/r280 plus/r280 cas4 driver

Run CP210xVCPInstaller.exe to Install the device driver

 /upload/service/install-r280-plus-cas4-programmer-1.jpg

Click on Cancel in R280 Plus properties

Install software for R280 plus automatically

 /upload/service/install-r280-plus-cas4-programmer-2.jpg

/upload/service/install-r280-plus-cas4-programmer-3.jpg

Install software for Silicon Labs CP210x USB to UART bridge (automatically)

/upload/service/install-r280-plus-cas4-programmer-4.jpg

 /upload/service/install-r280-plus-cas4-programmer-5.jpg

Run “register controls.Bat” MS-DOS Batch File in disk c:/program file/r280 plus

/upload/service/install-r280-plus-cas4-programmer-6.jpg

Run R280 Plus software:

First, read M5080 in R270 in circuit programmer

/upload/service/install-r280-plus-cas4-programmer-7.jpg

Select MCU M5080

 /upload/service/install-r280-plus-cas4-programmer-8.jpg

Read M5080

 /upload/service/install-r280-plus-cas4-programmer-9.jpg

Save the bin file after reading m5080

 /upload/service/install-r280-plus-cas4-programmer-10.jpg

Second, read 5M48H in R280 cas4 programmer

 /upload/service/install-r280-plus-cas4-programmer-11.jpg

Select MCU 5M48H to read

/upload/service/install-r280-plus-cas4-programmer-12.jpg

Installation complete.