Yanhua Mini ACDP full package program BMW FEM BDC key without soldering.
Youtube Video:
Yanhua Mini ACDP program BMW FEM BDC key in words and pictures:
- Prepare these:
- Install Bridge support
- Install bridge.
- Align the testing point and then tighten the screws
- Connect ICP socket
Connect OBP+ICP
Connect the offline OBD cable
- Insert the ICP socket, pay attention to the Pin position.
- Before inserting the ICP socket, check whether the ICP socket hand screw has been loosened upward and the thimbles retracted into the shell.
- Retaining the screws after installation.
- Insert into the CON7.
- Insert into the CON8.
- Connect OBD.
- Connect the Bridge.
- Plug the ACDP main unit.
- Connect the power clamp.
- Done.
As you can see, we need a full package of Yanhua Mini ACDP & adapters including
Yanhua Mini ACDP basic module + BMW FEM BDC authorization with module
SRC: http://www.obd2eshop.com/wholesale/yanhua-bmw-acdp-key-programmer.html
SRC: http://www.obd2eshop.com/wholesale/yanhua-mini-acdp-fem-bdc-module.html