Xhorse VVDI Mini Key Tool is released at OBD2eshop,it can do ID46/ID4D/ID48/ID4C/ID72/ID70 key cloning ,here is the toturial of how to copy ID46 key with Xhorse VVDI Mini Key Tool
Here we go:
Video demo:
Frist,
Remove cell before starting sensor copy process
In Xhorse App, connect Mini Key Tool with mobile phone
Then select Transponder Clone
Put transponder into coil
Detect transponder information, type: ID46
Follow steps below to perform ID46 online calculation
1.Put original key into coil to recognize
2.Close the antenna to the ignition switch of the car to collect
If not smart key, insert the original car key, turn on and off the ignition switch. Remove the original car key. Repeat that step until you are prompted to collect the data.
2.Close the antenna to the ignition switch of the car to collect
If not smart key, insert the original car key, turn on and off the ignition switch. Remove the original car key. Repeat that step until you are prompted to collect the data.
If it is a smart key, take out the smart key battery, put the smart key close to the induction area, turn on and off the ignition switch, then remove the key. Repeat that step until you are prompted to collect
Insert the original key into coil for verification
Query calculation result
Take out original key, put special chip or wireless remote into vvdi mini key tool
Take out original key, put special chip or wireless remote into vvdi mini key tool
Write data
Copy key success.
Install battery to Jaguar smart key and install special chip into key shell.
Test both keys, both can start engine.