Foxwell NT520 User Manual Of How To Register &update

Foxwell NT520 PRO rolled out OBD2Eshop – a device for the small workshop or demanding hobbyists. With this tool, everything is what you need … there are almost all available control units covers, you can fault memory read / delete, real-time data query, actuator test, service and oil carry out reset, make settings, and much more.

Here is the tutorial of how to register and update Foxwell nt520 Multi-System Scanner :

Update Foxwell NT520 via USB Cable:

For the first time you use Foxwell NT520, you need to use the USB to connect NT520 machine and one computer, then use the computer to download “FoxScanner” client (download link: http://www.foxwelltech.com/product/item-340.html) to register NT520. after registering succeed, you can download the car software that you want and then update.

If the machine is pre-installed the car software, you can use directly.

To be able to use FoxScanner, PC or laptop must meet the following minimum requirements:

Operation System: Win98/NT, Win ME, Win2000, Win XP, VISTA and Windows 7.
CPU: Intel PⅢ or better
RAM: 64MB or better
Hard Disk Space: 30MB or better
Display: 800*600 pixel, 16 byte true color display or better
Internet Explorer 4.0 or newer

NOTE

Before registration and updating, please make sure your network works correctly.

Foxwell NT520 user manual on register and download (Since Page 39)

http://www.obd2eshop.com/upload/pro/foxwell-nt520-pro-muti-system-scanner-user-manual.pdf

Foxwell NT520 register:

If you want to update the car model application, you need to register the machine first. Use USB cable to connect the computer, turn on the machine and find out the management program then choose “Update” and confirm, then run “FoxScanner” on the computer, login and choose ” Register Products”, then the FoxScanner tool will automatically read out the SN and password. Click on “Submit” to register.

Foxwell NT520 Update

After registering Foxwell NT520 successfully, use USB cable to connect the computer, go to “Application” and choose “Update”. Then run FoxScanner on the computer, log in and click on “Update” icon to update.